Making bricks out of shit!

Making bricks out of shit!

0
Comments Off on Making bricks out of shit!
Lead investigator Associate Professor Abbas Mohajerani said the research sought to tackle two environmental issues – the stockpiles of biosolids and the excavation of soil required for brick production

Around 30% of the world’s biosolids are stockpiled or sent to landfill, using up valuable land and potentially emitting greenhouse gases, creating an environmental challenge. Now a team at RMIT University in Melbourne, Australia, has demonstrated that fired-clay bricks incorporating biosolids could be a sustainable solution for both the wastewater treatment and brickmaking industries.

As well as being cheaper to produce, the biosolids bricks also had a lower thermal conductivity, transferring less heat to potentially give buildings higher environmental performance.

The study found there was a significant opportunity to create a new beneficial reuse market – bricks.

Lead investigator Associate Professor Abbas Mohajerani said the research sought to tackle two environmental issues – the stockpiles of biosolids and the excavation of soil required for brick production.

“More than 3 billion cubic metres of clay soil is dug up each year for the global brickmaking industry, to produce about 1.5 trillion bricks,” Mohajerani, a civil engineer in RMIT’s School of Engineering, said.

“Using biosolids in bricks could be the solution to these big environmental challenges.

“It’s a practical and sustainable proposal for recycling the biosolids currently stockpiled or going to landfill around the globe.”

The research examined the physical, chemical and mechanical properties of fired-clay bricks incorporating different proportions of biosolids, from 10 to 25%.

The biosolid-enhanced bricks passed compressive strength tests and analysis demonstrated heavy metals are largely trapped within the brick. Biosolids can have significantly different chemical characteristics, so the researchers recommend further testing before large-scale production.

The biosolids bricks are more porous than standard bricks, giving them lower thermal conductivity.

The research also showed brick firing energy demand was cut by up to 48.6% for bricks incorporating 25% biosolids. This is due to the organic content of the biosolids and could considerably reduce the carbon footprint of brick manufacturing companies.

The results of a comparative Life Cycle Assessment and an emissions study conducted as part of the research confirmed biosolids bricks offered a sustainable alternative approach to addressing the environmental impacts of biosolids management and brick manufacturing.

The research, funded by RMIT University, Melbourne Water and Australian Government Research Training Program scholarships, is published in the “Green Building Materials Special Issue” of Buildings.

(Courtesy: RMIT University, Australia)

Subscribe to Sawdust

Select your preferences
//s3.amazonaws.com/downloads.mailchimp.com/js/mc-validate.js